FRMRVM KAMERAS

Parameter für MOBOTIX-Kameras

http://<IP address>/cgi-bin/faststream.jpg (guest access)
http://<IP address>/control/faststream.jpg (user access)
Retrieves the live stream from the camera using additional image parameters. For example, the following command will show the live stream as M-JPEG from the camera in a generated HTML page:
http://<IP address>/cgi-bin/faststream.jpg?stream=full&html
Appending ?help to the end of the command will display the corresponding help page:
http://<IP address>/cgi-bin/faststream.jpg?help

Guest Access:
The URL http://<IP address>/cgi-bin/faststream.jpg provides guest access to the live stream. For additional information on how to set the maximum and preset image refresh rate, see the Start Page help page.

User Access:
The URL http://<IP address>/control/faststream.jpg provides user access to the live stream. For additional information on how to set the maximum and preset image refresh rate, see the Start Page help page. This access has been optimized for high image rates and thus delivers a video stream in MxPEG format, which has to be decoded accordingly. Please download the MOBOTIX SDK from www.mobotix.com in the Support > Developer Tools section for detailed instructions.

Overview of the faststream.jpg Command
Example: faststream.jpg?stream=full&fps=1.0

Parameter=Default	Values	Explanation
help		Help This overview.
stream=MxPEG	full MxPEG mxg	Stream Type Image data in stream: full: full JPEG images MxPEG: MOBOTIX optimized JPEG mxg: MxPEG Clipfile; not server push
noaudio		No Audio Switch Disable audio data in image stream. Audio is only available for MxPEG streams.
needlength		Need Content-Length Send HTTP content-length for every frame in server push stream. Note: This option is not useful for browsers.
fps=16	Escaped string	Frames per Second Frame rate of streamed images: e.g. '3.0' streaming with 3 frames per second. Set to 0 for maximum frame rate.
iframerefresh=0	0..60	Seconds between new I-frames I-frame interval in seconds. 0: turn off Note: Using this option disables jpheaderrefresh and jpheaderupdate.
jpheaderupdate=0	0..1000	Frames between tables refreshs Table refresh count. 0: off, 1: every frame, 2: every second frame, ...
jpheaderrefresh=10	0..60	Seconds between table refreshs Table refresh time. 0: off, 1: every second, 2: every second second, ...
framecount=0	0..	Frame Counter Amount of images delivered before stream stops (0=infinite).
fip=10.x.x.x	Escaped string	Factory IP Will only deliver an image if the camera has this factory IP address.
error=picture	picture empty content current	Error Handling Sets the error handling options in case no image is available: picture: returns the "No frame available!" image empty: returns nothing content: returns only the content type current: returns the current.jpg image
html		HTML Page With Stream Output HTML demo page including stream.
preview		Preview Mode Output image in the format given by the parameter size. It may be smaller to keep the aspect ratio
size=	Escaped string	Image Size Enter the desired image size in format [width]x[height]. Only used if the parameter preview is specified.
quality=60	10..90	JPEG Quality Enter the desired JPEG quality. Only used if the parameter preview is specified.
camera=both	right left both	Preview Camera Select the part of a double image that is displayed. Only used if the parameters preview or roi are specified and if the live stream of the camera shows both sensors.
roi		Region of Interest Output a part of the image given by the parameters roisize or camera.
roisize=	Escaped string	RoI Rectangle Enter an RoI rectangle in MCU format (blocks of 16x16 pixels), e.g. 2x3x12x10 (offsetX, offsetY, width, height). Only used if the parameter roi is specified.